Sine
Learn More
Run swept and/or fixed-frequency sine wave tests, with control of acceleration, velocity, and displacement.
Random
Learn More
Run Controlled spectrum random tests (tests with a spectrally shaped gaussian amplitude distribution).
Shock
Learn More
Run standard classical shock pulses as well as (optional) user-defined or SRS synthesized transient pulses.
Sine Resonance Track & Dwell
Learn More
Auto-detect transmissibility peaks from a sweep.
Sine on Random
Learn More
Run mixed-mode tests with sine tones superimposed on a random background.
Random on Random
Learn More
Run controlled spectrum random tests with swept random "tones" superimposed on a random background.
Sine on Sine
Learn More
Run mixed-mode tests with up to 32 sine tones simultaneously
Shock Response Spectrum (SRS)
Learn More
Perform Shock Response Spectrum (SRS) analysis. Run a shock pulse defined by a frequency vs. G peak table.
Transient Capture
Learn More
Capture a transient waveform for post process. Use alone for data acquisition, or with SRS for Shock Response Spectrum analysis.
Fatigue Damage Spectrum
Learn More
Measure your products fatigue and calculate its lifespan. Commonly used life acceleration techniques are applied to shorten test time.
Instant Degrees of Freedom® (iDOF)
Learn More
Prevent under or over testing on high value products where tight tolerances and short duration random testing is required.
Kurtosion®
Learn More
Re-introduce the high acceleration peaks back into your random vibration tests.
Test Acceleration
Learn More
Random, Sine-on-Random, Shock Response Spectrum test acceleration and generation.
Earthquake
Learn More
Run a shock pulse defined by a frequency vs. G peak table. Many different waveform synthesis generation techniques included.
Transient Waveforms control
Learn More
Import a time domain user specified transient.
RecorderVIEW
Learn More
Record your field acceleration measurements digitally, directly to your PC's hard drive.
Analyzer
Learn More
Provides additional plots in all test modes.
Field Data Replication (FDR)
Learn More
Reproduce, in your test lab on your shaker, the actual acceleration waveforms you measure in the field.
Accelerometer Calibration
Learn More
Add on software package for sensor calibration.
Bellcore
Learn More
Run earthquake tests similar to the Bellcore standards along with any other earthquake time history.
3-Axis Control
Learn More
2 to 3 Test Profiles. 2 to 3 Control Loops. Performed on X, Y, or Z Axis.
Dual Axis with Phase Control
Learn More
One Test Profile. One Controller. One Axis. Synchronized Phase.
Multi-Loop / Four-Post Control
Learn More
2 to 4 Test Profiles. 2 to 4 Control Loops. One Axis. Synchronized Phase.
Remote Options
Learn More
Use the remote terminals to connect your controller to operator station.
Web & E-Mail Notifications
Learn More
Monitor your tests from an internet connected device anywhere.
Active X
Learn More
Integrate your controller into your manufacturing process.
Math Traces & Calculator
Learn More
Define math functions based on graph traces, test parameters, etc.
Emergency Stop Switch
Learn More
Hardware switch that will cause the controller to shut down the active test.
Automated Calibration
Learn More
Perform automatic calibration of your VR9500 controller.
Tablet Remote Control
Learn More
Remotely control and monitor your shaker.
DC Offset
Learn More
One Unit using both the Output & COLA/AUX Output.
IEEE-344 Earthquake Control
Learn More
IEEE Standard for Seismic Qualification of Equipment for Nuclear Power Generating Stations
Random Import
Learn More
Import your time-based vibration data recording and convert to a power spectral density curve with breakpoint table.
Chatter Monitor
Learn More
Recorded events evaluated and determining if a chatter event has occurred.