Sine on Sine
Run mixed-mode tests with up to 32 sine tones simultaneouslyDownload Demo
Frequency/amplitude breakpoints of the background random acceleration spectrum are entered in an easy to read tabular form using either frequency and amplitude breakpoints, or by entering one endpoint and the desired dB/octave slope. Over 1000 separate frequency/amplitude breakpoints can be entered, allowing entry of virtually any test.
1 to 32 true floating-point precision sine tones can be superimposed on the background random spectrum, and swept back-and-forth between frequencies at a user-programmable rate. The amplitude and frequency sweep parameters are all user programmable. Up to 200 separate frequency/amplitude breakpoints can be entered, allowing entry of virtually any test spec.
The controller comes standard with 50 to 1600 lines of control to provide you with the frequency resolution required for your test. Why should you use higher lines of resolution?Lines & Noise Floor
The control signal can be a single input channel, or configured from 2 to 128 input channels with either multi-channel averaging or multi-channel notching for the random signal.
Tests can be scheduled to run a user-defined length of time, the spectrum level can be scaled by a specified dB-level, percentage, or scaled for a specified RMS acceleration. Level schedules can be entered to run various durations at different acceleration levels.
To protect your test article and shaker system, configurable acceleration limits, line limits and drive limits can be set by the user. The control input is also verified against shaker acceleration limits.
All of the test data can be stored to the disk for later retrieval. Data storage can be done manually, or programmed to automatically save at user-defined intervals.
Sine-on-Sine provides engineers the ability to sweep and hold multiple sine tones at different levels across a desired frequency range with no random background. Sine-on-Sine includes up to 32 true floating point precision sine tones, programmable amplitude and frequency sweep rates, and up to 50 separate frequency/amplitude breakpoints. Sine-on-Sine is also known as Multi-Sine, or multi-sinus.
The second output channel supplies a synchronization signal of the first sine tone.
Many graphical display options are available, including acceleration spectral density, output voltage spectral density and channel-to-channel transmissibility. Graphs can be easily auto-scaled or zoomed, and cursors displayed. Data and text annotations can be easily placed on the graphs, with data values updated live as the data changes.
Import analog or digital time data to automatically generate a profile. Imports PSD data, too.