Software

The VR software packages can be configured for as many or as few test modules as you’d like. You need at least one to get started, but can add more at any time in the future. In fact, our modules are activated by electronic keys, so you can even “rent” modules if you find you have short term needs for specific tests.

Sine

Learn More

Run swept and/or fixed-frequency sine wave tests, with control of acceleration, velocity, and displacement.

Random

Learn More

Run Controlled spectrum random tests (tests with a spectrally shaped gaussian amplitude distribution).

Shock

Learn More

Run standard classical shock pulses as well as (optional) user-defined or SRS synthesized transient pulses.

Sine Resonance Track & Dwell

Learn More

Auto-detect transmissibility peaks from a sweep.

Sine on Random

Learn More

Run mixed-mode tests with sine tones superimposed on a random background.

Random on Random

Learn More

Run controlled spectrum random tests with swept random "tones" superimposed on a random background.

Sine on Sine

Learn More

Run mixed-mode tests with up to 32 sine tones simultaneously

Shock Response Spectrum (SRS)

Learn More

Perform Shock Response Spectrum (SRS) analysis. Run a shock pulse defined by a frequency vs. G peak table.

Transient Capture

Learn More

Capture a transient waveform for post process. Use alone for data acquisition, or with SRS for Shock Response Spectrum analysis.

Fatigue Damage Spectrum

Learn More

Measure your products fatigue and calculate its lifespan. Commonly used life acceleration techniques are applied to shorten test time.

Instant Degrees of Freedom® (iDOF)

Learn More

Prevent under or over testing on high value products where tight tolerances and short duration random testing is required.

Kurtosion®

Learn More

Re-introduce the high acceleration peaks back into your random vibration tests.

Earthquake

Learn More

Run a shock pulse defined by a frequency vs. G peak table. Many different waveform synthesis generation techniques included.

Transient Waveforms control

Learn More

Import a time domain user specified transient.

RecorderVIEW

Learn More

Record your field acceleration measurements digitally, directly to your PC's hard drive.

Analyzer

Learn More

Provides additional plots in all test modes.

Field Data Replication (FDR)

Learn More

Reproduce, in your test lab on your shaker, the actual acceleration waveforms you measure in the field.

Accelerometer Calibration

Learn More

Add on software package for sensor calibration.

Bellcore

Learn More

Run earthquake tests similar to the Bellcore standards along with any other earthquake time history.

3-Axis Control

Learn More

2 to 3 Test Profiles. 2 to 3 Control Loops. Performed on X, Y, or Z Axis.

EditVIEW

Learn More

Edit your collected data.

Dual Axis with Phase Control

Learn More

One Test Profile. One Controller. One Axis. Synchronized Phase.

Multi-Loop / Four-Post Control

Learn More

2 to 4 Test Profiles. 2 to 4 Control Loops. One Axis. Synchronized Phase.

Digital Remote I/O

Learn More

Use the remote terminals to connect your controller to operator station.

Digital Remote I/O with Analog Inputs

Learn More

Web & E-Mail Notifications

Learn More

Monitor your tests from an internet connected device anywhere.

Active X

Learn More

Integrate your controller into your manufacturing process.

Math Traces & Calculator

Learn More

Define math functions based on graph traces, test parameters, etc.

Emergency Stop Switch

Learn More

Hardware switch that will cause the controller to shut down the active test.

Automated Calibration

Learn More

Perform automatic calibration of your VR9500 controller.

High Frequency options

Learn More

Extend upper frequency range of major modules.

Tablet Remote Control

Learn More

Remotely control and monitor your shaker.

DC Offset

Learn More

One Unit using both the Output & COLA/AUX Output.

IEEE-344 Earthquake Control

Learn More

IEEE Standard for Seismic Qualification of Equipment for Nuclear Power Generating Stations

Random Import

Learn More

Import your time-based vibration data recording and convert to a power spectral density curve with breakpoint table.

Chatter Monitor

Learn More

Recorded events evaluated and determining if a chatter event has occurred.

Rotational Angular Acceleration

Learn More

How Can We Help You?

Contact Us